Menu Close

The best degreaser for heavy-duty industrial equipment is Meguiar’s D10801 super degreaser due to its strong and fast residue-free performance. It has a pleasant fragrance and all you have to do is spray and wipe it off. You can let it soak overnight if your equipment is especially dirty. 

This tough degreaser will keep your equipment clean and looking good. The only downside to it is that you have to watch your proportions. It also works well on engines and soiled car interiors.

Heavy-duty equipment is degreased and cleaned on a regular basis for a variety of reasons, depending on the operator and the location where the equipment is used. The most prevalent cause for degreasing heavy machinery (aside from routine and preventive maintenance), is when diagnosing engine and hydraulic component leaks.

Heavy-duty mechanics can’t accurately determine the cause of a leak unless the suspected source has been completely cleaned. Heavy-duty equipment is prone to the build-up of difficult-to-remove and undesirable coatings.

Grime, grease, tar, oil, and hydraulic fluid are just a few examples. To make matters worse, these coatings will frequently “bake on” over time as a result of exposure (sun, wind. etc.).

Due to the blending effect of the above-mentioned list of contaminants, cleaning and degreasing heavy equipment can take a long time. Grease, oil, tar, and grime combine to form a difficult-to-clean mess.

That “mess” can be ugly at times, but it can also cause damage to the equipment. Engines and any moving parts, in particular.

Degreaser types

The following is a list of four basic types of industrial degreasers:

1. Butyl Degreaser

Butyl degreaser is a water-based degreaser that is most commonly used to clean petroleum-based compounds and greases such as motor oil. When you apply it to oily filth, it turns it into a liquid that’s easier to clean.

As a result, it is mostly used in the automobile and allied industries. The winner for the most powerful engine degreaser is CLD 201 Orange Degreaser by Chemical Guys (paid link):

This degreaser is well-known for its performance in the vehicle industry and automobiles. It is formulated with a professional-strength citrus-based mix that effectively removes even the toughest oil, filth, debris, and other contaminants.

It will effectively remove the grime from your car’s engine, tools, tires, garage floor surface, undercarriages, rims, and other equipment. After implementing it, you’ll notice that even the most greasy equipment becomes effortlessly cleaned.

Because it’s so concentrated, you can dilute it with water and use it. It is a powerful engine degreaser that doesn’t break the bank.

2. Non-butyl degreaser

Non-butyl degreaser is commonly used in restaurants, hotels, cafeterias, toilets, and other public places. It has a high alkaline content, which helps to remove stains and debris left behind by animal fat-based grease and soap scums.

Because the non-butyl degreaser has no odor or has a soapy scent, it can be used in public locations such as restaurants, cafeterias, and restrooms. And the winner for best commercial equipment degreaser is WD 40 Industrial-Strength Cleaner and Degreaser (paid link):

When it comes to a strong degreaser, it’s always reactive on porous surfaces like aluminum and plastic. That is why WD40 company 30063 specialist degreaser was developed. It is a degreaser that can effectively clean any weaker surface.

WD-40 has been a trusted brand for preserving, cleaning, and degreasing metallic objects for more than five decades. It’s an extremely effective grease remover and stain remover. It’s environmentally friendly, long-lasting, and manufactured using bio-solvent formulations.

This degreaser is non-acidic, non-abrasive, and non-flammable. Most significantly, it has a very low odor, making it suitable for use in public spaces such as restaurants, cafés, and hospitals.

The WD40 business 30063 is created with a biodegradable formula that meets US EPA safer choice criteria and is VOC compliant in all 50 states. It is also registered under the A1, A2, A4, A8, and B1 acts of the National Sanitation Foundation (NSF).

This degreaser is suitable for a variety of surfaces:

  • Paint
  • Glass
  • Aluminum
  • Copper
  • Metal
  • Plastic
  • Rubber
  • Leather
  • Granite
  • Stainless steel

… and many more! It also comes in five different sizes: 24 oz., 32 oz., 1 gallon, 5 gallons, and 55 gallons so you can choose the one perfect for your needs and requirements.

When cleaning oily tools, shop floors, automotive parts, industrial machinery, and other heavy equipment, this degreaser really comes in handy. Last but not least, you can use this degreaser with your cleaning equipment (like a power washer).

This is the best all-around industrial degreaser that can handle any job and a wide range of surfaces, from hard to soft.

3. Degreaser for Heavy-Duty Applications

This type of heavy-duty degreaser works best for industrial and commercial machinery. It is one of the most powerful degreasers on the market, and it’s primarily available in a liquid-base form.

Unfortunately, it is also harmful to your skin, this is why your people need to wear protective clothing while degreasing with it. If you’re looking for a super-strong degreaser for your commercial or industrial setup, a heavy-duty degreaser is the one you should go with.

The best overall degreaser for heavy-duty equipment on the market right now is Meguiar’s D10801 Super Degreaser (paid link):

This degreaser is the first thing that comes to mind when looking for the fastest, yet toughest industrial grease remover. With the help of this degreaser, even the toughest greasy surfaces will be shiny in no time!

It is created using a unique formula that ensures a residue-free performance. It also aids in the prevention of unsightly white stains. As a result, once you’ve washed your equipment, there will be no markings left.

When it comes to performance, it’s really straightforward. You must apply it to the roughest greasy surface and wait a few minutes for it to break down. Once it has, you just wipe it off.

The degreaser must be thoroughly mixed with water. Because it is quite powerful and potentially dangerous to your skin, you or your staff should wear protective clothing while using it.

This degreaser has a light, non-invasive herbal odor that some people even like. It will clean the oiliest surface in a matter of minutes. If other degreasers can’t do it, the Meguiar D10801 is definitely up to the challenge.

It is simply the best heavy-duty degreaser on the market!

4. Everyday Degreaser

To minimize stinking oil and greasy buildup, we should clean our equipment every day, which is why an everyday degreaser is ideal. This is a gentle, non-toxic, and environmentally friendly degreaser that you can use every day without fear of harm.

For the best everyday industrial cleaner and degreaser, I would choose Simple Green 19128 Crystal (paid link):

Simple Green 19128 is crystal clear and translucent, it does a fantastic job, and you won’t have any unpleasant odors on your equipment afterward. It works effectively and provides you with a variety of cleaning options.

Another advantage is that you may use it anywhere you need to degrease, from heavy machinery to kitchen equipment. It quickly removes stains from ceramics, fiberglass, metallic goods, enamel, hospital equipment, heavy equipment, restaurant or kitchen equipment, dirt, grease, oil, fat, and grime, as well as clears all types of surfaces.

However, we urge that you adequately wet it down so that your surface is not damaged. It has managed to be non-toxic, which means it is not damaging to your body, despite its versatility.

It is also non-corrosive, which means it will not rust your equipment. If you need a multi-purpose degreaser, the Simple Green 19128 is the one to get.

How do degreasers work?

It is a good idea to read what is written on the bottle before you do anything and if you are still not sure, here are some basic instructions:

  1. Apply the degreaser first, then wait several minutes.
  2. Once the obstinate grease and oil grime have melted, rinse it.
  3. Put it away to dry.

If the grease hasn’t been removed, we can repeat the technique or utilize a hot water pressure washer for better results.



Attention! This article is for informational purposes ONLY and is NOT a replacement for a professional advice! All statements, prices, contact information, recommendations, and reviews contained herein are based on the information we believe to be reliable, but the accuracy or completeness thereof is not guaranteed. You will need to visit company's website for details and updates, as well as consult your local specialist for appropriate solution to your problem..


DISCLAIMER: AS AN AMAZON ASSOCIATE I EARN FROM QUALIFYING PURCHASES. THIS POST CONTAINS AFFILIATE LINKS THAT WILL REWARD ME MONETARILY OR OTHERWISE WHEN YOU USE THEM TO MAKE QUALIFYING PURCHASES. FOR MORE INFORMATION, PLEASE READ MY EARNINGS DISCLAIMER.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

wp